Chemlok® 607 is a clear, one-coat adhesive designed for bonding unvulcanized silicone rubber and select specialty elastomers to a variety of substrates including metals, glass, plastics, and textiles. The product is formulated for industrial rubber-to-substrate bonding processes where single-coat application and compatibility with peroxide-cured elastomers are required.
According to the manufacturer’s technical data, Chemlok 607 supports bonding of silicone (VMQ, PMQ, PVMQ), fluoroelastomers (FKM), polyacrylates (ACM), ethylene acrylic (AEM), epichlorohydrin (ECH), and peroxide-cured nitrile and HNBR compounds. The adhesive can be applied by brush, spray, or dip methods, and may be diluted with methanol or ethanol to achieve desired coating weight and coverage.
Chemlok 607 is typically air-dried prior to bonding and can also be dried at elevated temperatures. It is intended for industrial and commercial use by trained personnel and is supplied with manufacturer guidance for surface preparation, drying, and storage.
| Parameter | Typical Value |
| Appearance | Clear to slightly yellow liquid |
| Chemical Type | Solvent-based rubber-to-substrate adhesive |
| CAS No. | Not specified in manufacturer TDS |
| Density | 820–840 kg/m³ (6.8–7.0 lb/gal) |
| Solids Content (by weight) | 6.2–6.8 % |
| Flash Point (Seta) | 9°C (49°F) |
| Solvents | Methanol, Ethanol |
| pH | 8.5 – 10.5 |
The manufacturer does not specify a fixed dosage for general rubber bonding. For fabric coating, typical dry pick-up levels of 0.05–1.0% (based on dry fabric weight) are referenced in the datasheet.
Disclaimer:
Recommended dosage may vary based on formulation and processing conditions. Users should verify dosage before commercial use.
Store in original, unopened containers at 21–27°C in a cool, well-ventilated area. Keep away from heat, sparks, and open flame. Use appropriate industrial safety procedures and refer to the Safety Data Sheet (SDS) for handling guidance. Product is intended for industrial/commercial use by trained personnel only.
Manufacturer: Parker LORD
Reference: Chemlok® 607 Adhesive – Technical Data Sheet (DS3151E, Rev. 6)
Lab Line Enterprises is an ISO 9001:2015 certified supplier and independent dealer of industrial rubber chemicals and bonding agents. Chemlok 607 adhesive is supplied to customers involved in rubber molding, silicone rubber processing, and specialty elastomer applications across major Indian industrial regions including Mumbai, Pune, Ahmedabad, Chennai, Bengaluru, Delhi NCR, Faridabad, Gurugram, and Coimbatore. For trials, prototyping, and R&D purposes, small pack sizes such as 1 kg and 5 kg may be arranged on request, subject to availability. As an independent dealer, Lab Line Enterprises supplies this material based on manufacturer documentation and standard industry handling practices. Customers are advised to review technical data and conduct internal trials to confirm suitability for their specific process
Looking for the right chemical solution? We’re here to help. Whether it’s specialty polymers, rubber additives, or custom formulations, share your specific needs and our experts will tailor the perfect solution for you.
By downloading the datasheet, you consent to share your company name, email address, and mobile number with Lab Line Enterprises. This information may be used for internal marketing and sales communication.
